Monel K500 Round Bar
Buy Large Or Small Quantity ASTM B865 UNS N05500 Monel K500 Rod, Monel K500 Welding Rod At Discounted Prices
Rythme Alloys is a manufacturer, exporter, and supplier of Monel K500 Round Bar and uses premium quality raw materials and available materials to enhance the product’s ability to provide the best products. We also offer a wide range of custom-made products on customer’s prerequisites.
MONEL K500 is a age hardened alloy, whose basic composition makeup consists of elements like Nickel & Copper. Which combines the corrosion resistance of Alloy 400 with high strength, fatigue resistance, and erosion resistance. MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. MONEL K500 has excellent corrosion-resistant characteristics. These characteristics are similar to Monel 400.
We Have A Huge Selection Of Monel Alloy K500 Bar, Monel Alloy K500 Square Bars, Alloy K500 Round Bar Stock At Low Prices In Mumbai, India
Alloy 400 Round Bar Specification
| Specification | ASTM B 865 / ASME SB 865 / AMS 4676 / QQ N 286, ASTM B865 UNS N04405 |
|---|---|
| Grade | Monel K500 – UNS N04405 |
| Monel K500 Bar Stock size (Round) | Diameter: 3-~800mm |
| Monel K500 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Monel K500 Hex Bar size | 2-100mm A/F |
| Monel K500 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Monel K500 Square bar size | 4 to 100mm |
| Section | 3.0 to 12.0mm thickness |
| Monel K500 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Monel K500 Billet Size | 1/2″ to 495mm Diameter |
| Monel K500 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 201mm ID) |
| Monel K500 Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Monel K500 Round Bar Standard Dimensions | Diameter / Height: |
| Finish | centreless ground, Cold (bright) drawn, smooth turned, hot rolled, slit rolled edge, peeled, Rough Turned, Bright, hot rolled annealed, Grinding, Polish, Centreless Ground & Black |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Technique | Monel K500 Cold Drawn, Hot Rolled, Forged Round Bar, Cold Rolled, Rod |
| Condition | Hardened & tempered, annealed |
| Processing | Bar cutting to 650mm |
ASTM B865 Monel Bar Condition
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Alloy K500 Bar Surface finish
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
Monel K500 Round Bar Sizes
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8 – 3.00 | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6 – 2.50 | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50 – 6.00 | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4 – 2.00 | h9-h10-h11 |
Monel K500 Bar Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
Monel K500 Round Bar Chemical Composition
Grade | Ni | Fe | C | Mn | Si | Cu | Al | S | Ti |
|---|---|---|---|---|---|---|---|---|---|
Monel K500 | 63.0 min | 0.5 – 2 | 0.25 max | 1.5 max | 0.5 max | 27.0 – 33.0 | 2.3 – 3.15 | 0.010 max | 0.35 – 0.85 |
AMS 4676 Monel K500 Bar Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
Monel K500 | 2.4375 | N05500 |
Other Round Bars
Product Ranges
Metals
Contact Details
Address: 6th Khetwadi Lane, S.V.P. Road 20, Joshi Bhuvan, Ground flr, Mumbai – 400 004, India.
Telephone: 022 66394536
Email: info@rythmealloys.com