Monel 400 Round Bars

Alloy 400 Round Bar, b164 uns n04400, ASME SB164 2.4068, Monel 400 Round Bars Manufacturer in Mumbai, India

Rythme Alloys is a manufacturer, exporter, and supplier of Monel 400 Round Bars and uses premium quality raw materials and available materials to enhance the product’s ability to provide the best products. We also offer a wide range of custom-made products on customer’s prerequisites.

Some important features of the monel 400 round bars include its resistance to seawater and steam at high temperatures, its excellent resistance to rapidly flowing brackish water, and its excellent resistance to stress corrosion cracking in most freshwaters. Besides this, b164 uns n04400 is particularly resistant to de-aerated halogen-based acids like hydrochloric and hydrofluoric acids. It has excellent resistance to neutral and alkaline-based salts & it is highly resistant to alkalis.

In fact, Alloy 400 round bar is practically immune to chloride-related ion stress corrosion cracking in typical environments. Although its corrosion resistance is very good in reductive environments,  it is considered to be poor in oxidative conditions. The b164 uns n04400 Bar is not useful in oxidative acid environments, such as nitric acid and nitrous.

We Have A Huge Selection Of Monel 400 Flat Bar & Hex Bar, Monel 400 Welding Rod, Monel 400 Bar Stock At Low Prices In Mumbai, India

Alloy 400 Round Bar Specification

SpecificationASTM B164 UNS N04400
GradeMonel 400 – UNS N04400
Monel 400 Bar Stock size (Round)Diameter: 3-~800mm
Monel 400 Flat bar sizeThickness: 2 -100mm
Width: 10 to 500mm
Monel 400 Hex Bar size2-100mm A/F
Monel 400 Angle bar size3mm*20mm*20mm~12mm*100mm*100mm
Monel 400 Square bar size4 to 100mm
Section3.0 to 12.0mm thickness
Monel 400 Channel Bar80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Monel 400 Billet Size1/2″ to 495mm Diameter
Monel 400 Hollow Bar32mm OD x 16mm ID to 250mm OD x 201mm ID)
Monel 400 Rectangles Size33 x 30mm to 295 x 1066mm
Monel 400 Round Bar Standard DimensionsDiameter / Height:

Finishcentreless ground, Cold (bright) drawn, smooth turned, hot rolled, slit rolled edge, peeled, Rough Turned, Bright, hot rolled annealed, Grinding, Polish, Centreless Ground & Black
SurfaceHot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished
ToleranceH8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
TechniqueMonel 400 Cold Drawn, Hot Rolled, Forged Round Bar, Cold Rolled, Rod
ConditionHardened & tempered, annealed
Monel 400 Round Bar ProcessingBar cutting to 650mm

 

b164 uns n04400 Bar Condition

H&T
Hardened and tempered.
ANN
Annealed
PH
Precipitation hardened.

 

Monel 400 Round Bar Surface finish

CD
Cold drawn
P
Polished
BD
Bright drawn
SRE
Slit rolled edge
CG
Centreless ground
HF
Hot finished
CF
Cold finished
HRAP
Hot rolled annealed and pickled
P&T
Peeled and turned
RT
Rough turned/peeled
ST
Smooth turned
PR
Peeled and reeled

Alloy 400 Round Bar Sizes

Type
SIZES (mm)
SIZES (Inches)
ISO Tolerance
Cold Drawn and Polish
3.00 – 75.00
1/8 – 3.00
h8-h9-h10-h11
Cold Drawn and Ground
10.00 – 75.00
5/6 – 2.50
h8-h9-h10-h11
Peeled and Polished
40.00 – 150.00
1.50 – 6.00
h11, h11-DIN 1013
Peeled and Ground
20.00 – 50.00
3/4 – 2.00
h9-h10-h11

Monel 400 Round Bar Mechanical Properties

Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
8.9 g/cm3
1446 °C (2635 °F)
Psi – 67000 , MPa – 462
Psi – 21500 , MPa – 148
45 %

B164 uns n04400 Bar Chemical Composition

Grade
Ni
Fe
C
Mn
Si
Cu
Mg
Ti
S
Monel 400
99.0 min
0.4 max
0.02 max
0.35 max
0.2 max
0.25 max
0.15 max
0.1 max
0.01 max

ASTM B164 Monel 400 Round Bar Equivalent Grades

STANDARD
WERKSTOFF NR.
UNS
GOST
AFNOR
JIS
BS
EN
Monel 400
2.4068
N04400
НП-2
NW 2201
NA 12
NLC-Ni 99