High Nickel Alloy 200 Round Bar
High Nickel Alloy, Nickel 200 Round Bar, ASTM B160 Nickel 200 Round Bars, 200 Nickel Round Bar, ASTM B160 200 Nickel Square Bars, WERKSTOFF NR. 2.4066 Polished Bar, Nickel UNS N02200 Bright Bar, Nickel Alloy 200 Rods, JIS NW 2200 round bar
Rythme Alloys is a manufacturer, exporter, and supplier of High Nickel Alloy 200 Round Bar and uses premium quality raw materials and available materials to enhance the product’s ability to provide the best products. We also offer a wide range of custom-made products on customer’s prerequisites.
High Nickel alloy 200 Round bar has better corrosion resistance properties. Nickel Alloy 200 Polished bars can be effectively hot formed at the temperature range between 870 Degrees C – 1230 Degree C. High Nickel alloy 200 square bar contains Nickel, Silicon, Carbon, and chromium Content. Nickel Alloy 200 Flat bars have the best corrosion resistance to oxidation resistance. Nickel Alloy 200 Threaded Bars contain good welding properties. High Nickel 200 Round Bars are mostly used in food processing units and the architecture industry. Nickel 200 Polished Bars are often used in offshore oil drilling companies and the pulp and paper industry. Nickel Alloy 200 Rectangular bar is also used for Heat exchangers and condensers. Nickel Alloy 200 Hex Bar can be used extensively in Power Generation Units.
Alloy 200 Flat Bar, Nickel GOST НП-2 Cold Drawn Round Bar, 200 Nickel Polished Bar, Specialist Distributor of ASTM B160 Alloy 200 Threaded Bar, Hot Rolled Nickel 200 Round Bar, Nickel 200 Hexagonal Bar,200 Alloy Black Bar
High Nickel Alloy 200 Round Bar Specification:
| Grade | Nickel Alloy 200 / UNS N02200 / Werkstoff Nr. 2.4066 |
| Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI, IS |
| Standard | ASTM B160 / ASME SB160 |
| Round Bars | Outside Diameter in the range of 4mm to 500mm above as per the customer requirement. |
| Bright Bars | Outside Diameter in the range of 4mm to 500 mm above as per the customer requirement. |
| Hex Bars | 18mm – 57mm (11/16″ to 2-3/4″) above as per the requirement. |
| Square Bars | 18mm – 47mm (11/16″ to 1-3/4″) above as per the requirement. |
| Flat Bars | 1/2” to 10” in thickness range of 2mm to 150mm |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Finish | Black, Bright. Peeled and Polished, Solution annealed. |
| Technique | Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
High Nickel Alloy 200 Round Bar Chemical Composition:
| Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
|---|---|---|---|---|---|---|---|---|---|
| Nickel 200 | 99.0 min | 0.4 max | 0.15 max | 0.35 max | 0.1 max | 0.25 max | – | – | 0.01 max |
High Nickel Alloy 200 Round Bar Mechanical Properties:
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Other Products Available
| Nickel Alloy 200 Round Bars | Alloy 200 Flat Bars | Nickel Alloy N02200 Square Bars |
| 200 Nickel Alloy Tie Rods | Nickel Alloy 200 Threaded Bars | Alloy 200 Round Bars |
| Nickel Alloy 200 Bright Bars | Alloy 200 Hex Bars | Nickel Alloy 200 Flat Bars |
| Alloy UNS N02200 Hexagonal Bars | Nickel Alloy UNS N02200 Round Rods | WNR. 2.4066 Rectangular Bars |
| Alloy 200 Hollow Bars | Werkstoff Nr. 2.4066 Bars | UNS N02200 Polished Bars |
Other Round Bars
Product Ranges
Metals
Contact Details
Address: 6th Khetwadi Lane, S.V.P. Road 20, Joshi Bhuvan, Ground flr, Mumbai – 400 004, India.
Telephone: 022 66394536
Email: info@rythmealloys.com