321 Stainless Steel Round Bar
Stainless Steel 321/321H Round Bars manufacturer in India, ASTM A276 S32100 Rods, SS 321 Round Bars, UNS S32100 Rods, SS DIN 1.4541 Rods, ASTM A276 Stainless Steel 321H Round Bars, SS UNS S32109 Bright Bar
Rythme Alloys is a prominent supplier and exporter of 321 Stainless Steel Round Bar We have been producing these products for many years and have gained decades of working experience and control management that has enhanced the production of these Bars. We make and produce the following effects based on national and international quality standards and norms only, and mostly get appreciated from our esteemed clients.
321 Stainless Steel Round Bar has the best corrosion resistance to a wide range of corrosive media. Stainless Steel alloy 321 round bar consists nickel content up to 12% and chromium content up to 19%. Stainless Steel 321 Threaded bars have the best corrosion resistance to oxidation corrosion. Stainless Steel 321 Hexagonal bars possess high creep & strength rupture properties. Stainless steel 321H Hex bars are mostly used for pumps, shafts, and valves. Stainless Steel 321 Polished Bars can be used for heat exchangers and condensers. Stainless Steel 321H Square bars are often used for seawater equipment.
Suppliers of ASTM A479 Stainless Steel 321 Hex Bar, 321H SS Shaft Exporter, Spring Steel Bars, 321H SS Cold Drawn Bars, Specialist Distributor of ASTM A276 SS 321 Threaded Bar, Stainless Steel 321 Flat Bar, 321 Stainless Steel Black Bar Exporter in India.
Stainless Steel 321 Round Bar Specification
| Grade | SS 321/321H |
| Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI, IS |
| Standard | ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 |
| Round Bars | Outside Diameter in the range of 4mm to 500mm above as per the customer requirement. |
| Bright Bars | Outside Diameter in the range of 4mm to 500 mm above as per the customer requirement. |
| Hex Bars | 18mm – 57mm (11/16″ to 2-3/4″) above as per the requirement. |
| Square Bars | 18mm – 47mm (11/16″ to 1-3/4″) above as per the requirement. |
| Flat Bars | 1/2” to 10” in thickness range of 2mm to 150mm |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Finish | Black, Bright. Peeled and Polished, Solution annealed. |
| Technique | Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Mechanical Properties Of 321 Stainless Steel Round Bar
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
ASTM A276/ ASME SA 276 SS 321 Bar Chemical Composition
| Grade | Ti | Mn | C | Si | S | P | Mo | Cr | Ni |
| SS 321 | 5(C+N) to 0.70 maximum | 2.0 maximum | 0.08 maximum | 1.0 maximum | 0.030 maximum | 0.045 maximum | – | 17.00 to 19.00 | 9.00 to 12.00 |
Equivalent Grade Of 321 SS Hex Bar
| WERKSTOFF NR. | STANDARD | JIS | UNS | EN |
| 1.4541 | SS 321 | SUS 321 | S32100 | X6CrNiTi18-10 |
Other Round Bars
Product Ranges
Metals
Contact Details
Address: 6th Khetwadi Lane, S.V.P. Road 20, Joshi Bhuvan, Ground flr, Mumbai – 400 004, India.
Telephone: 022 66394536
Email: info@rythmealloys.com